Our products

Product Group

Product Group
  • H2 Catalysts
  • H2 Measurement
  • Accessories

Product Area

Product Area
  • Gas purification
  • H2 combustion engines
  • H2 electrolyzers
  • H2 fuel cells
  • H2 process heat
  • Battery monitoring

Industry

Industry
  • Energy and Hydrogen economy
  • Industry & Production
  • Mobility & Transport
  • Research & Development
  • Air & Space

Sensor for Automotive

Sensor for H2 exhaust gas Measurement

High-temp. H2 sensor optionally Also with ATEX

Sensor for Industrial applications

The perfect addition for reading and adjusting

NEO120 adapter

NEO160 adapter

NEO170 adapter

Heating cartridge 28V

Heating cartridge 24V

Heating cartridge 5V

NEO1XXX

Sensor for Automotive

The smart, simple version of our high-tech H2 concentration sensors are the sensors in the “neoOne” series (neo1XXX). They are significantly more cost-effective and smaller. Created from AEC-Q100 components, the sensor arrived from the factory pre-calibrated for immediate use.

Most important features:

  • Possible measuring ranges:
    • 0-5 vol.-% H2 NEO1005
    • 0-10 vol.-% H2 NEO1010
    • 0-100 vol.-% H2 NEO1100
  • Pressure range: 0.6 – 1.5 bara
  • Humidity: 0 – 100% r.h. (non-condensing)
  • Temperature measuring range: -40°C – 85°C (short-term up to 105°C).
  • Carrier gases: air, nitrogen, oxygen depleted air available
  • Measuring signal independent of pressure, temperature and humidity
  • Signal output via CAN 2.0 A/B with 125/250/500 kbps

The gas concentration is not changed by the measurement and oxygen is not required for operation.

Data sheetRequest

NEO952

Sensor for H2 exhaust gas Measurement

Hydrogen sensor system for automotive applications for monitoring exhaust gases up to 5% H2 by volume at exhaust gas temperatures of up to 400°C.

Our hydrogen measurement system can quickly and accurately measure hydrogen in the exhaust gas of hydrogen internal combustion engines (ICE) / H2-fuelled petrol engines or solid oxide fuel cells (SOFC).
The measured values are output temperature-compensated via the CAN bus 2.0A/B with 125/250/500/1000 kbps.

Most important features:

  • Measurements to just above the lower explosion limit, i.e. 0 – 5 vol.-% H2
  • Tolerance:± 0.5 % by volume H2
  • Temperature measuring range: -40 to 400 °C
  • Pressure range: 0.6 to 1.5 bar absolute
  • Humidity: 0 to 100 % r.h. (non-condensing)
  • Response time: t90< 10 s
  • Recovery time: t10< 10 s
  • Signal: CAN 2.0A/B with 250/500 kbps
Data sheetRequest

NEO9XXHT

High-temp. H2 sensor optionally Also with ATEX

The NEO974, NEO983 and NEO986 sensor systems are also available ATEX Zone I certification. These hightemperature sensorsare specified for use up to 120°C and are appropiate to use in both automotive and industrial applications.

Most important features:

  • Possible measuring ranges:
    • 0-5 vol.-% H2 NEO974HT-ATEX
    • 0-10 vol.-% H2 NEO983HT-ATEX
    • 0-100 vol.-% H2 NEO986HT-ATEX
  • II 2G/- Ex db IIB+H2 T1 Gb/- at -40°C< Ta< 100°C
  • Pressure range: 0.6 – 6 bara
  • Humidity: 0 – 100% r.h. (non-condensing)
  • Temperature measuring range: -40°C – 120°C.
  • Carrier gases: air, nitrogen, oxygen depleted air aviailable
  • Measuring signal independent of pressure, temperature and humidity
  • Signal output via CAN 2.0 A/B, Modbus RTU via RS485, 0-10V or 4-20mA
  • Replacement system for the AMS HLS-442, HLS-440P and the HPS-100

The gas concentration is not changed by the measurement and oxygen is not required for the measurement.

Data sheetRequest

NEO9XXX

Sensor for Industrial applications

Sensor system for measuring the hydrogen concentration in air, oxygen, nitrogen or oxygen-depleted air with temperature-, pressure- and humidity-compensated signal evaluation for automotive or industrial applications. Applicable in the range: 0.6 – 5 bara, 0 – 100% r.h. (non-condensing) and 40°C – 120°C. A mathematical prediction algorithm ensures very fast response times.

Important properties:

  • Measuring ranges: 0-5 vol.-% H2 (NEO9005), 0-10 vol.-% H2 (NEO9010) or 0-100 vol.-% H2 (NEO9100)
  • Tolerance:± 0.3 vol.-% H2 or± 2 vol.-% H2
  • Pressure range: 0.6 – 6 bara
  • Humidity: 0 – 100% r.h. (non-condensing)
  • Temperature measuring range: -40°C – 120°C.
  • Carrier gases air, N2, O2, oxygen-depleted air, methane, synthetic natural gas are possible
  • Measuring signal independent of pressure, temperature and humidity
  • Signal output via CAN 2.0, Modbus RTU via RS485, 0-10V or 4-20mA
  • Oxygen is not required for the measurement. No sample extraction necessary.
  • Can also be used in the intake manifold for H2 direct injection

Suitable for concentration measurement in the ventilation of the crankcase or in the recirculation of the fuel cell (recirculation sensor; for controlling the purge valve)

Data sheetRequest

CAN-Logger

The perfect addition for reading and adjusting

The neoCANLogger is the perfect addition for reading and readjusting our NEO9XXA, NEO9XXHTA and NEO4XXA series sensors. It enables the automatic translation of the CAN 2.0 A/B signal into readable data.

Most important features:

  • Data logging to SD card with date and time
  • Live measurement data on TFT display
  • Simple CAN ID setting, zero point adjustment
  • Supply with 12 to 30V
  • Continuous translation and sending of data
  • Signal output in readable format
  • Possibility to transform into other signal forms, such as 4-20mA or 0-10V

The scope of delivery includes: neoCANLogger, 12V plug-in power supply, 2x spring contact plugs, 32GB SD card

Data sheetRequest

NEO120

NEO120 adapter

Screw-in adapter for enclosure mounting

Adapter for our gas sensors of the NEO9XX, NEO9XXX, NEO9XXHT and NEO4XX series. This adapter allows the installation of a gas concentration sensor by screwing it into an enclosure. It is available in various connection threads, including G1/4‘, G1/2’, NPT 1/4‘ and NPT 1/2’. Other sizes are available on request.

Key features:

  • Fast integration of hydrogen sensors into existing systems
  • Simple design enables flexible adaptation of the adapters to individual requirements
  • Additional splash guard grid or sintered metal disc keeps water drops, splash water etc. away from the sensor opening
  • No negative influence on the gas concentration measurement of the sensors; possibly longer response and recovery times
  • With fitting and mounting screws for NEO20X heating cartridges to prevent condensation
Data sheetRequest

NEO160

NEO160 adapter

Adapter for our gas sensors of the NEO9XX, NEO9XXX, NEO9XXHT and NEO4XX series. This wall bracket is used to mount a gas concentration sensor on a wall or ceiling, e.g. for room monitoring.

Important features:

  • Fast integration of hydrogen sensors into existing systems
  • Simple design allows flexible adaptation of the adapter to individual requirements
  • Additional splash guard grille or sintered metal disc keeps water droplets, splash water, etc. away from the sensor opening
  • No negative influence on the gas concentration measurement of the sensors; possible extension of the response and decay time
  • With fitting and mounting screws for NEO20X heating cartridges to prevent condensation
Data sheetRequest

NEO170

NEO170 adapter

Bypass adapter for large pipe diameters

Adapter for our gas sensors of the NEO9XX, NEO9XXX, NEO9XXHT and NEO4XX series. The bypass adapter enables the installation of a gas concentration sensor in pipes with a large inner diameter and high volume flows, optionally also in humid environments. It is available in different connection sizes, including DN 150, DN 200 and DN 250. Other sizes are available on request.

Key features:

  • Fast integration of hydrogen sensors into existing systems
  • Simple design allows flexible adaptation of the adapters to individual requirements
  • Additional splash guard grille or sintered metal disc keeps water droplets, splash water, etc. away from the sensor opening
  • No negative influence on the gas concentration measurement of the sensors; possible extension of the response and decay time
  • With fitting and mounting screws for NEO20X heating cartridges to prevent condensation
Data sheetRequest

Heating cartridge

Heating cartridge 28V

NEO20X heating cartridges to prevent condensation

The NEO20X heating cartridges are PTC heating elements that are operated with a fixed supply voltage of 5V, 24V or 28V. They are used to heat the sensor and thus prevent condensation of water vapour. These heating cartridges are not required for the actual measurement, but are used in extremely humid measurement environments to prevent the temperature from falling below the dew point.

Data sheetRequest

Heating cartridge

Heating cartridge 24V

NEO20X heating cartridges to prevent condensation

The NEO20X heating cartridges are PTC heating elements that are operated with a fixed supply voltage of 5V, 24V or 28V. They are used to heat the sensor and thus prevent condensation of water vapour. These heating cartridges are not required for the actual measurement, but are used in extremely humid measurement environments to prevent the temperature from falling below the dew point.

Data sheetRequest

Heating cartridge

Heating cartridge 5V

NEO20X heating cartridges to prevent condensation

The NEO20X heating cartridges are PTC heating elements that are operated with a fixed supply voltage of 5V, 24V or 28V. They are used to heat the sensor and thus prevent condensation of water vapour. These heating cartridges are not required for the actual measurement, but are used in extremely humid measurement environments to prevent the temperature from falling below the dew point.

Data sheetRequest