Our products

Product Group

Product Group
  • H2 Catalysts
  • H2 Measurement
  • Accessories

Product Area

Product Area
  • Gas purification
  • H2 combustion engines
  • H2 electrolyzers
  • H2 fuel cells
  • H2 process heat
  • Battery monitoring

Industry

Industry
  • Energy and Hydrogen economy
  • Industry & Production
  • Mobility & Transport
  • Research & Development
  • Air & Space

1 kW H2 catalytic converter, H2 Filter

10 kW H2 catalytic converter, H2 electrolysis Filterr

25 kW H2 catalytic Converter

50 kW H2 catalytic Converter

NEO305

1 kW H2 catalytic converter, H2 Filter

System for flameless hydrogen combustion in a wide concentration range, outside the ignition limits. Conversion of hydrogen into usable heat energy and water by catalytic reaction with oxygen.

Typical applications of our catalysts:

  • Catalytic, flameless, thermal combustion of H2/air gas mixtures for heat recovery and/or exhaust gas purification on an industrial scale
  • Fine purification of gases by removing minimal impurities
  • Combustion of hydrocarbon gas mixtures (at elevated starting temperature)
  • Catalytic post-combustion of fuel cell exhaust gases or electrolysis gas
  • Removal of oxygen or hydrogen residues from electrolysis gas e.g. purification of air or helium
  • Depletion of oxygen or hydrogen in chemical processes
  • Safety technology, explosion prevention, fire prevention (through O2 discharge)

Further technical details on the NEO305 in 1 inch pipe, with max. H2 flow: 0.4 ms/h and thermal output of 1 kW can be found in the technical “Data sheet”.

Data sheetRequest

NEO324

10 kW H2 catalytic converter, H2 electrolysis Filterr

The NEO324 is a “smaller version” of the NEO342, e.g. to burn (waste) hydrogen in a wide concentration range without flames or emissions and to utilize the heat energy. The NEO324 can also be used to purify a helium gas stream of hydrogen or electrolysis gases. Other air-gas mixtures can also be burned. The NEO324 catalytic converter has a diameter of 66 mm.

Typical applications:

  • Catalytic, flameless, thermal combustion of H2/air gas mixtures for heat recovery and/or exhaust gas purification on an industrial scale
  • Fine purification of gases by removing minimal impurities
  • Combustion of hydrocarbon gas mixtures (at elevated starting temperature)
  • Catalytic post-combustion of fuel cell exhaust gases or electrolysis gas
  • Removal of oxygen or hydrogen residues from electrolysis gas, e.g. purification of air or helium
  • Depletion of oxygen or hydrogen in chemical processes can be used for boil-off management
  • DeOxy-Cat
  • Safety technology, explosion prevention, fire prevention (through O2 discharge)

Further technical details on the NEO324 with a diameter of 66 mm, max. H2 flow: 3.5 ms/h and thermal output of 10 kW can be found in the technical “Data sheet”.

Data sheetRequest

NEO342

25 kW H2 catalytic Converter

You can use the NEO342 H2 oxidizer to burn (waste) hydrogen, for example, in a wide concentration range without any flames or emissions (catalytic combustion) and use the heat energy. The NEO342 can also be used to purify a helium gas stream of hydrogen or electrolysis gases (oxygen purification from hydrogen and hydrogen purification from oxygen). Other air-gas mixtures can also be burned.

Typical applications:

  • Catalytic, flameless, thermal combustion / oxidation of H2/air gas mixtures for
  • Heat recovery and/or waste gas purification on an industrial scale
  • Fine purification of gases by removing minimal impurities
  • Combustion of hydrocarbon gas mixtures (at elevated starting temperature)
  • Catalytic post-combustion of fuel cell exhaust gases or electrolysis gas
  • Removal of oxygen or hydrogen residues from electrolysis gas, e.g. purification of air or helium
  • Depletion of oxygen or hydrogen in chemical processes
  • Can be used for boil-off management (boil-off gas (BOG)) or as a “passive flare”
  • DeOxy-Kat, alternative to thermal afterburning (TNV)
  • Safety technology, explosion prevention, fire prevention (through O2 discharge)

Further technical details on the NEO342 with an internal diameter of 110 mm, max. H2 flow of 8.5 ms/h and thermal output of 25 kW can be found in the technical “Data sheet”.

Data sheetRequest

NEO361

50 kW H2 catalytic Converter

Even with our largest H2-Oxikat NEO361, you can, for example, burn (waste) hydrogen in a flameless and emission-free manner, in a wide concentration range (catalytic combustion) and use the heat energy. The NEO361 can also be used to purify a helium gas stream of hydrogen or electrolysis gases (oxygen purification of hydrogen and hydrogen purification of oxygen). Other air-gas mixtures can also be combusted.

Typical applications:

  • Catalytic, flameless, thermal combustion / oxidation of H2/air gas mixtures for
  • Heat recovery and/or waste gas purification on an industrial scale
  • Fine purification of gases by removing minimal impurities
  • Combustion of hydrocarbon gas mixtures (at elevated starting temperature)
  • Catalytic post-combustion of fuel cell exhaust gases or electrolysis gas
  • Removal of oxygen or hydrogen residues from electrolysis gas, e.g. purification of air or helium
  • Depletion of oxygen or hydrogen in chemical processes
  • Can be used for boil-off management (boil-off gas (BOG)) or as a “passive flare”
  • Can be used as a “passive flare”, alternative to thermal post-combustion (TNV)
  • Production of CO2-neutral process heat

Further technical details on the NEO342 with an internal diameter of 162.3 mm, max. H2 flow of 17 ms/h and thermal output of 50 kW can be found in the technical “Data sheet”.

Data sheetRequest